China Komatsu Hydraulic Final Drive Motor Supplier
China Komatsu Hydraulic Final Drive Motor Supplier
Komatsu Hydraulic Final Drive Motor   Massey-Ferguson Hydraulic Final Drive Motor   Thomas Hydraulic Final Drive Motor  
English
English
  • Home
  • Stock Categories
    • Komatsu Hydraulic Final Drive Motor
    • Massey-Ferguson Hydraulic Final Drive Motor
    • Thomas Hydraulic Final Drive Motor
    • JCB Low Emission Hydraulic Final Drive Motor
    • Ihi Hydraulic Final Drive Motor
    • Gehl Hydraulic Final Drive Motor
    • Wacher Neuson Hydraulic Final Drive Motor
    • Kobelco Dozer Travel Motor
    • Bobcat Hydraulic Final Drive Motor
    • JCB Auto Hydraulic Final Drive Motor
    • Gradall Hydraulic Final Drive Motor
    • Fecon Hydraulic Final Drive Motor
    • Bobcat Swing Motor
    • Poclain Hydraulic Final Drive Motor
    • Bomag Hydraulic Final Drive Motor
    • Case Split Pump Configuration Hydraulic Final Drive Motor
    • Xcg Hydraulic Final Drive Motor
    • JCB Hi Flow Low Hydraulic Final Drive Motor
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Super Precision Bearings
    • Super Precision Angular Contact Bearings
    • Super Precision Bearing
    • Slewing Ring
    • Cylindrical Roller Radial Bearing
    • Cylindrical Roller Bearing
    • Tapered Roller Bearing
    • Angular Contact Ball Bearings
    • Double Row Tapered Thrust Roller Bearings
    • Railway Rolling Spherical Roller Bearings
  • Technical Articles
  • Komatsu Hydraulic Final Drive Motor
  • Massey-Ferguson Hydraulic Final Drive Motor
  • Thomas Hydraulic Final Drive Motor
✖

Home

Stock Categories

Technical Articles

Komatsu Hydraulic Final Drive Motor

Massey-Ferguson Hydraulic Final Drive Motor

Thomas Hydraulic Final Drive Motor

Home>Products>Slewing Ring Bearings>10-20 0641/0-32032 IMO Slewing Ring Bearings

  • 10-20 0641/0-32032 IMO Slewing Ring Bearings
  • 10-20 0641/0-32032 IMO Slewing Ring Bearings

IMO 10-20 0641/0-32032 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

10-20 0641/0-32032 IMO Slewing Ring Bearings

category

Slewing Ring Bearings

IMO 10-20 0641/0-32032 Bearing SPECIFICATIONS

  • With over 10170 full-service stores, our 10-20 0641/0-32032 IMO Slewing Ring Bearings inventory is extensive and our parts are priced right. China Komatsu Hydraulic Final Drive Motor Supplier within 24 5.60 mm Dimension S4 hours. This helps you maximize your productivity by saving 150.000 mm Width B time and your hard-earned dollars.

  • IMO
  • 10-20 0641/0-32032

  • 150.000 mm
  • 12.3 mm
  • 5.60 mm
  • 220 mm
  • 2960 kN
  • 1000 rpm
  • 4.0 mm
  • 1930 kN
China Komatsu Hydraulic Final Drive Motor Supplier

China Komatsu Hydraulic Final Drive Motor SupplierChina

  • China Komatsu Hydraulic Final Drive Motor Supplier2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

10-20 0641/0-32032 IMO Slewing Ring Bearings Description of the code

  • 150.000 mm
  • 12.3 mm
  • 5.60 mm
  • 220 mm
  • 2960 kN
  • 1000 rpm
  • 4.0 mm
  • 1930 kN
  • 6
  • 258.000 mm
  • 143.000 lb
  • 342.0 mm
  • 940 rpm
  • 6.0 mm
  • 4.00 mm
  • 370.000 mm
  • 0.1800
  • 251.0 mm

IMO 10-20 0641/0-32032 10-20 0641/0-32032 IMO Slewing Ring Bearings Code system

 

MTE-21 Kaydon Slewing Ring BearingsWeight:565.300 lb; Backing Housing Diameter Ds:485.0 mm; Lubrication Hole Diameter h:7.5 mm; Outer-Ring Set:409RXS2045; Chamfer rsmin:1.50 mm; Chamfer r1smin2:10.0 mm; Width C:380.000 mm; Angle of Chamfer r1smin:20º; O.D. D:520.000 mm; Lubrication Groove g:16.0 mm; Type:RX-1; DUR/DOR F/E:409.000 mm; Inner-Ring Set:370ARXS2045; Width B:380.000 mm; Dynamic Load Rating C11:14040 kN; Number of Lubrication Holes:10;
77264B Franke Slewing Ring Bearingsa - Effective Center Location3:-6.4 mm; G1 - Heat Generation Factor (Roller-Raceway):26.5; K - Factor7:2.14; Bearing Weight:0.6 Kg; Aa - Cage-Cone Backface Clearance:0 mm; Db - Cup Backface Backing Diameter:71.12 mm; B:24.176 mm; Cone Part Number:346; Cg - Geometry Factor:0.0676; G2 - Heat Generation Factor (Rib-Roller End):13; r - Cup Backface To Clear Radius2:2.29 mm; d:31.750 mm; e - ISO Factor8:0.27;
77280A Franke Slewing Ring BearingsGrease Lubrication - T Seal:2400 rpm; Bearing Number:22215; Dimension BC:8.47 in; Oil Lubrication - M/N Seal:1600 rpm; Y2 - Geometry Factor:4.08; C - Dynamic Load (Basic):49900 lb; Adapter Sleeve Axial Movement Max:0.03 in; Y1 - Geometry Factor:2.74; Oil Lubrication - T Seal:2900 rpm; Adapter Sleeve Axial Movement Min:0.022 in; Dimension M:1.73 in; Shaft Size Type:Imperial; Oil Lubrication - B/C/O Seal:1300 rpm;
68566A Franke Slewing Ring BearingsDimension H:260 mm; Shaft Size:240 mm; Seal Type:Aluminium Triple Lab; Bolt Size:4 x M36; Note:This product line wa; Ca - Axial Load Rating:12994 lbf; Cor - Static Load Rating:289779 lbf; Bearing Type:Split Cylindrical Re; Bearing Number:LSM240BR; Dimension K:160 mm; Support Type:Four-Bolt Plummer Bl; Dimension M:280 mm; Cr - Dynamic Load Rating:167258 lbf; Maximum Speed:820 rpm; Dimension J:650 mm;
77300B Franke Slewing Ring BearingsDynamic Load Rating:13200 lbf; Bolt Hole Length N1:28.6 mm; Base to Center Height H:79.38 mm; Center of Bearing from End S:19.8 mm; Dimension L1:96.3 mm; Static Load Rating:7120 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Bolt Hole Spacing J:228.6 mm; Inside Ring Outside Diameter:2.728 in; Seal Type:Labyrinth Seal; Foot Height H1:30.2 mm; Bearing Number:GN111KLLB; Total Length L:288.9 mm; Bolt Hole Width N:19.00 mm;
12-25 0855/1-0321 IMO Slewing Ring BearingsLockwasher and Lockplates:MS 3052; L:116.00 mm; Locknut:HM 3052; C11:46.00 mm; d1:240.00 mm; Weight:12.8 Kg; C:34 mm; Appropriate Hydraulic Nut:HMV52; D3:310 mm; Thread G:Tr260x4;
11-20 0941/1-32162 IMO Slewing Ring BearingsDimension SVV:4.49 in; Shaft Size Type:Metric; Housing Style:Piloted Flange Cartr; Dimension H:1.00 in; Bearing Number:22219; Dimension F:10.34 in; Dimension B Exp:2.54 in; Grease Lubrication - B/C/O Seal:950 rpm; Dimension RVV:0.73 in; Dimension J (Bolt Size):0.75 in; C0 - Static Load:99000 lb; Dimension G:7.375 in; Dimension L:3.77 in; Grease Lubrication - M/N Seal:1300 rpm; Dimension E:6.10 in;
92-20 0641/1-37232 IMO Slewing Ring BearingsBearing Width:20 mm; Full Timken Part Number:3MM9114WICRDUH; Ce - Dynamic Radial Rating1:47600 N; Contact Angle:25 º; Design Units:METRIC; Bearing Weight:0.604 Kg; Ball Type:STEEL; r - Outer Ring To Clear Radius3:1.0 mm; Da - Outer Ring Backing Diameter:102.400 mm; R - Inner Ring To Clear Radius2:1.0 mm; D:110 mm; Limiting Speed (Oil):21000 rpm; Precision Class:ISO P4S (ABEC 7/9); Limiting Speed (Grease):10500 rpm;
11-16 0300/1-0812 IMO Slewing Ring BearingsAb - Cage-Cone Frontface Clearance:0.3 mm; Cone Part Number:JLM104946; db - Cone Backface Backing Diameter:61 mm; Cg - Geometry Factor:0.0801; Series:LM104900; C0 - Static Radial Rating:104000 N; Design Units:METRIC; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9770 lbf; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location4:-5.3 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:13000 N;
74130A Franke Slewing Ring BearingsY1 - ISO Factor9:2.04; da - Cone Frontface Backing Diameter:10.04 in; Cone Part Number:EE130901D; Ab - Cage-Cone Frontface Clearance:0.18 in; Cup Part Number:131400; d:9.0000 in; Y2 - ISO Factor10:3.04; Series:130000; Cage Type:Stamped Steel; r - Cup Backface To Clear Radius2:0.06 in; Cg - Geometry Factor11:0.136; Bearing Weight:93.70 lb; R - Cone Frontface To Clear Radius1:0.220 in; K - Factor7:1.77;

 

 

No.BrandBXANJGEa
68540AFranke - - 190.00 mm22 mm380.00 mm - - -
12-20 0741/1-32242IMO - - - - - - - -
77264AFranke - - - - - - - -
77258BFranke - - - - - 34.42 mm - -
16305001Kaydon - - - - - - - -
68577AFranke7.7 in - - - - - - -
MTO-050TKaydon - - - - - - - -
MTO-21Kaydon - - - - - - - -
68755AFranke - - - - - - - -
77260AFranke - - - - - - - -
68777AFranke0.6250 in - - - - - - -
68737AFranke - - - - - - - -
10-16 0300/0-0802IMO - - - - - - - -
68679AFranke - - - - - - - -
90-20 1091/0-37072IMO - - - - - - - -
77284AFranke - - - - - - - -
77282BFranke - - - - - - - -
74132AFranke - - - - - - - 5.00 mm
10-25 0455/0-0401IMO - - - - - - - -
10-20 1091/0-32072IMO - - - - - - - -
10-16 0500/0-0804IMO - - - - - - - -
90-20 0741/0-37042IMO - - - - - - - -
68773AFranke - - - - - - - -
68597AFranke - - - - - - - -
74116AFranke - - - - - - - -

 

10-20 0641/0-32032 IMO Slewing Ring Bearings Video

 

IMO 10-20 0641/0-32032 INTERCHANGE

Slewing Ring Bearings Part series 10-20 0641/0-32032 is a potential replacement for these common bearing part numbers:

  • 10-20 0641/0-32032

  • 10-20 0641/0-32032

  • 10-20 0641/0-32032

  • 10-20 0641/0-32032

  • 10-20 0641/0-32032

  • 10-20 0641/0-32032

  • 10-20 0641/0-32032

  • 10-20 0641/0-32032

Contact Us

China Komatsu Hydraulic Final Drive Motor Supplier
Address6518 Litimat Road, Dississauga, Intario, D2Y 4U7, Canada
Phone(Working Time)+1-659-239-5477
Fax
  • China Komatsu Hydraulic Final Drive Motor Supplier
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

IMO 10-20 0641/0-32032 Technical Articles

Does a pump increase temperature?
Why does the temperature increase in a liquid when pumpedThanks in advance for your help and guidance. Is the reason that the temperature in a liquid that is being pump increases due to the difference  Temperature Rise in Pumps Pump Number:...
How is hydraulic pressure generated?
How Pressure is created in a hydraulic system. - YouTubeApr 27, 2012 — How Pressure is created in a hydraulic system. ✓. 77,691 views77K views. • Apr 27, 2012. 151 45. Share Save. 151 / 45  Hydraulic Pressure vs. Flow: Understanding...
How is torque calculated in a hydraulic motor?
Hydraulic Output Torque Calculator, Output Torque CalculationWhen a Hydraulic Motor is being driven the Output Torque M(Nm) can be calculated by following these steps: Pressure P (bar), typical pressures for hydraulic motors would be up to 250 bar....

Slewing Ring Bearings CATEGORIES

  • Komatsu Hydraulic Final Drive Motor
  • Massey-Ferguson Hydraulic Final Drive Motor
  • Thomas Hydraulic Final Drive Motor
  • JCB Low Emission Hydraulic Final Drive Motor
  • Ihi Hydraulic Final Drive Motor
  • Gehl Hydraulic Final Drive Motor
  • Wacher Neuson Hydraulic Final Drive Motor
  • Kobelco Dozer Travel Motor
  • Bobcat Hydraulic Final Drive Motor
  • JCB Auto Hydraulic Final Drive Motor
  • Gradall Hydraulic Final Drive Motor
  • Fecon Hydraulic Final Drive Motor
  • Bobcat Swing Motor
  • Poclain Hydraulic Final Drive Motor
  • Bomag Hydraulic Final Drive Motor
  • Case Split Pump Configuration Hydraulic Final Drive Motor
  • Xcg Hydraulic Final Drive Motor
  • JCB Hi Flow Low Hydraulic Final Drive Motor
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Super Precision Bearings
  • Super Precision Angular Contact Bearings
  • Super Precision Bearing
  • Slewing Ring
  • Cylindrical Roller Radial Bearing
  • Cylindrical Roller Bearing
  • Tapered Roller Bearing
  • Angular Contact Ball Bearings
  • Double Row Tapered Thrust Roller Bearings
  • Railway Rolling Spherical Roller Bearings
More

Customers Who Viewed IMO 10-20 0641/0-32032 Bearing Also Viewed

  • RK6-16E1Z Kaydon Slewing Ring Bearings
  • MTE-265X Kaydon Slewing Ring Bearings
  • MTE-265T Kaydon Slewing Ring Bearings
  • MTE-265 Kaydon Slewing Ring Bearings
  • MTO-265XT Kaydon Slewing Ring Bearings
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

China Komatsu Hydraulic Final Drive Motor Supplier. Copyright © 2017 - 2025 All Rights Reserved.

  • Home
  • Stock Categories
    • Komatsu Hydraulic Final Drive Motor
    • Massey-Ferguson Hydraulic Final Drive Motor
    • Thomas Hydraulic Final Drive Motor
    • JCB Low Emission Hydraulic Final Drive Motor
    • Ihi Hydraulic Final Drive Motor
    • Gehl Hydraulic Final Drive Motor
    • Wacher Neuson Hydraulic Final Drive Motor
    • Kobelco Dozer Travel Motor
    • Bobcat Hydraulic Final Drive Motor
    • JCB Auto Hydraulic Final Drive Motor
    • Gradall Hydraulic Final Drive Motor
    • Fecon Hydraulic Final Drive Motor
    • Bobcat Swing Motor
    • Poclain Hydraulic Final Drive Motor
    • Bomag Hydraulic Final Drive Motor
    • Case Split Pump Configuration Hydraulic Final Drive Motor
    • Xcg Hydraulic Final Drive Motor
    • JCB Hi Flow Low Hydraulic Final Drive Motor
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Super Precision Bearings
    • Super Precision Angular Contact Bearings
    • Super Precision Bearing
    • Slewing Ring
    • Cylindrical Roller Radial Bearing
    • Cylindrical Roller Bearing
    • Tapered Roller Bearing
    • Angular Contact Ball Bearings
    • Double Row Tapered Thrust Roller Bearings
    • Railway Rolling Spherical Roller Bearings
  • Technical Articles
  • Komatsu Hydraulic Final Drive Motor
  • Massey-Ferguson Hydraulic Final Drive Motor
  • Thomas Hydraulic Final Drive Motor
✖

Home

Stock Categories

Technical Articles

Komatsu Hydraulic Final Drive Motor

Massey-Ferguson Hydraulic Final Drive Motor

Thomas Hydraulic Final Drive Motor

Contact Us